Acom SI-1 User Manual

Operating Manual Model : SI-100W 1st Edition April. 2007

10 Operating 1. Mode function Press the MODE key, it will be changed likely as below ordering. Normal

11  Press the Tare key, the tare weighing will be set. The weighing display will be marked on “0”. The designator will be marked “net”

12 SI-100W Item 60kg 120kg 150kg 300kg Min. unit weight 20g 40g 50g 100g Min. sample weight 2kg 4kg 5kg 10kg Max. counting 3,000 PCS 5

13 6. Auto shut off This function is used to prevent the unnecessary discharging when the battery power is using. The power will be shut off au

14 <<Working>> If the actual back light function is needed after setting, press the * key about 3 second (Weighing status “0

15 Head office / Factory #679-1, Yugo-Ri,Gunnae-Myun, Pocheon-si, Kyunggi-Do 487-872 Korea Tel : +82-31-531-2205 Fax :

16

2 Prefare Acom Inc. would like to thank you for your choosing our model SI-100W Smart Bench Scale. We are committed to creating high qualit

3 Precaution before assembling and using  Warning / Caution It means that improper using will be directly connected with serious injur

4 The power cable must be prevented from any harmfulness. Do not remanufacture intentionally. Must turn

5 Always level the scale. Do not use a cleaner which is included the solvent or sinner. Put the gloves on whenever carrying on or

6 Assembling Unwrap the package from the scale. Place the scale on the flat place. Using the cord-stopper, adjust the wire under the pole

7 Make the load cell’s and adaptor’s wire out top of the pole. Inset the necktie. After put the load cell jack into the connector, fix it usi

8 Name of the parts Key and function Key and function This key is used to restore as “0” on the weighing display. It can be

9 This key is used to change the mode. This key is used to set the unit weight of sample in the count mode. Furthermore, it is used to set the Ma